EXSTAR 7000系列TG/DTA配備的水平橫立式雙秤桿設計能夠提供無偏移的基線,對于外在環境所造成的干擾,包括溫度擾動、熱流效應等因素,它都能有高度的抗干擾效能;此外,在精工的升溫速率控制熱分析(CRTA)系統下,使熱重分析檢測能夠兼具彈性應用的同時,更具備了優異的高度效能表現。
TG/DTA 可以測得以下各項數據:
- 重量變化
- 相變化
- 成份比例分析Compositional Analysis
- 熔點Melting
- 裂解溫度Decomposition Temperature
- 玻璃轉移溫度Glass Transition Temperature
- 熱穩定性Thermal Stability
- 氧化誘導時間 O.I.T.(Oxidative Induction Time)
- 揮發性測試Measurement of Volatiles
- 玻璃陶瓷相變化點Phase Transformation and Properties of glass ceramics
- 填充物比例分析Filler Content
- 阻燃性研究Flammability Studies
? 特殊應用
- 真空測試熱重變化 Vacuum Thermal Testing
TG/DTA 7200 Specification
■ Balance System:Horizontal differential type
■ Temperature range:Ambient to 1100℃
■ TG range:+/- 400mg
■ TG RMS noise / sensitivity:0.1 ug / 0.2 ug
■ DTA range:+/- 1000 uV
■ DTA RMS noise / sensitivity:0.03 uV / 0.06 uV
■ Scanning rates:0.01 to 150℃/min
■ Maximum Sample weight:200 mg
■ Atmosphere:Air, inert gas flow, vacuum (to 1.3Pa)
■ Purge gas flow rate:0 to 1000 ml/min
■ Cooling time:From 1000℃ to 50℃ within 12 minutes
■ Gas purge control (option):Gas Controller, Mass Flow Controller
■ Auto sampler (option):50 Sample, mechanical finger transport
■ Dimensions:420 (W) x 600 (D) x 315 (H) mm. With auto-sampler attached:420 (W) x 600 (D) x 640 (H) mm
■ Balance System:Horizontal differential type
■ Temperature range:Ambient to 1100℃
■ TG range:+/- 400mg
■ TG RMS noise / sensitivity:0.1 ug / 0.2 ug
■ DTA range:+/- 1000 uV
■ DTA RMS noise / sensitivity:0.03 uV / 0.06 uV
■ Scanning rates:0.01 to 150℃/min
■ Maximum Sample weight:200 mg
■ Atmosphere:Air, inert gas flow, vacuum (to 1.3Pa)
■ Purge gas flow rate:0 to 1000 ml/min
■ Cooling time:From 1000℃ to 50℃ within 12 minutes
■ Gas purge control (option):Gas Controller, Mass Flow Controller
■ Auto sampler (option):50 Sample, mechanical finger transport
■ Dimensions:420 (W) x 600 (D) x 315 (H) mm. With auto-sampler attached:420 (W) x 600 (D) x 640 (H) mm
主要?jiǎng)t是藉由樣品的重量變化與相變化來判斷材料中所含的成份比例與特性鑒定,其他如材料的熱穩定性分析、含水量或有機溶劑等的揮發物測量、填充物比例分析、氧化誘導時間與材料的阻燃性研究等各種應用途徑。