產品型號:JSB0601
產品名稱:石油蠟含油量測定器(JSB0601)
產品說明:
JSB0601石油蠟含油量測定器
一、符合GB/T3554、ISO2908、ASTMD721標準
二、主要技術參數
主機
冷浴孔尺寸:Φ27×150 mm (4孔)
致冷溫度:常溫~-40℃(-40℃只在20℃室溫環境)
控溫精度:±0.5℃
控溫方式:數顯溫控儀測控
功 率:450W
蒸發裝置
控制溫度:35±1℃
控溫方式:電子固態調壓器
加熱方式:白熾燈泡
功率:100W
工作電源:AC220V±10% 50HZ
三、性能及特點:
1、主機采用進口壓縮機制冷,制冷量大,降溫速度快,在常溫下低溫度可達-40℃;可在40℃以下的各種環境下工作,適應性強,噪音低。
2、采用數顯溫控儀自動控溫,控溫準確,精度高,并可在致冷溫度有效范圍內任意一點進行調節。
3、儀器主機有4個浴孔,可同時做4個樣。
4、蒸發裝置采用白熾燈泡加熱,用電子固態調壓器調壓控溫。
JSB0601 petroleum wax oil content tester
I. Comply with GB/T3554, ISO2908, ASTMD721 standards
Ii. Main technical parameters
The host
Cold bath hole size: Φ 27 holes (4) x 150 mm
Refrigerating temperature: normal temperature ~ -40℃ (-40℃ only in 20℃ room temperature environment)
Temperature control accuracy: ±0.5℃
Temperature control mode: digital display temperature controller
Power: 450 w
Evaporation device
Control temperature: 35±1℃
Temperature control mode: electronic solid-state voltage regulator
Heating method: incandescent bulb
Maximum power: 100W
Power supply: AC220V± 10% 50HZ
Iii. Performance and Characteristics:
1. The host machine adopts imported compressor for refrigeration, with large cooling capacity and fast cooling speed. The lowest temperature at room temperature can reach -40℃; Can work under 40℃ in various environments, strong adaptability, low noise.
2. Adopt digital display temperature controller to automatically control the temperature, which is accurate and high in precision, and can be adjusted at any point within the effective range of cooling temperature.
3. The main machine has 4 bath holes, and 4 samples can be made at the same time.
4. The evaporator USES incandescent bulb for heating and electronic solid-state voltage regulator for regulating pressure and controlling temperature.