便攜式移動式污泥脫水設備
產品簡介
立豐環保是污泥脫水集成處理的專業設備制造商。針對不同的情況,我們提供便攜式移動式污泥脫水設備或傳統脫水系統的解決方案。該系統具有可靠性,實用性,現場即插即用的特點。所有的設備集中在一個車廂內,我們預安裝好MDS / TRP污泥脫水機、自動泡藥機、攪拌器、絮凝槽、泵和電線,以保證處理效果和zui短處理時間。
LIFENG is professional manufacturer of sludge dewatering containerized plants. For each case, we provide a solution which is going to use portable system or stationary. You will get reliable and practical plants and only need plug and play at site. All procedure of machines is sort inside one container. For best performance we use the MDS/TRP with sludge dewatering machine completed with automatic dosing device, agitator, tanks, pumps included cabling, everything pre-installed. This enables us to reach very short processing time.
立豐環保PSSD(便攜式移動式污泥脫水設備)是一種高效率的環保系統,處理后污泥的體積減量高達90%,脫水泥餅含固率通常為20%±5%。立豐環保研發的移動式污泥脫水系統,主要應用于化糞池,垃圾服務站點,含油污水,洗車水,污水處理廠,溝渠池塘及其他需要固液分離場合。
LIFENG PSSD(portable sewage sludge dewatering)system is an environmental friendly system with high efficiency that gives a volume reduction of up to 90 % and a dry solid percent of typically 20%±5% in the dewatered sludge. LIFENG is developed for portable sewage sludge dewatering in connection with emptying of septic tanks, service stations, petrol &oil separators, carwash, WWTP, Gully’s etc.
流程圖
立豐環保PSSD系統的有效性是基于我們過去多年發展的經驗形成的,其目標是提高該系統的穩定性,效率和增強功能。下面簡要描述立豐環保 PSSD系統的工作流程。
LIFENG PSSD effectiveness is based upon our experience over the last many years of development, where the objectives have always been to increase stability, efficiency and increase the functions of LIFENG PSSD system. A basic description of how LIFENG PSSD system works is briefly described below.
1.LIFENG PSSD can be operated from the control panel.
立豐環保PSSD系統通過電控柜控制。
2.The sludge is taken up into the sludge cutting machine by pump.
污泥通過泵輸送到污泥切割機
3.After sludge has been cut, the sludge is then pumped into the flocculation tank. During this process a polymer is added to cause floc.. Than the sludge flows into dewatering machine after flocculation being formed by polymer reaction between sludge and polymer.
污泥切割后,將污泥輸送到絮凝槽中。 在該過程中,加入聚合物絮凝。經過污泥和聚合物之間反應形成礬花之后,污泥流入脫水機中。
4.While the sludge is being transported to the dewatering machine, the operator can return the cleansed water back to its source, this keeps the process time to a bare minimum, just one of the many practical functions which makes LIFENG PSSD easy and efficient to operate.
當污泥被運送到脫水機時,操作者可以將凈化后的水返回到原水池中,處理時間短,這是立豐環保PSSD系統操作簡單,高效的眾多實用功能之一。
5.LIFENG PSSD could discharge sludge cake directly.
立豐環保PSSD系統可直接排出泥餅。
特征
1.設計緊湊,所有設備集中在一個車廂內。
Compact design, all procedure of machines is sort inside one container.
2.移動式系統可快速響應突發事件及*式運維服務
Fast delivery and start-up because of the portable concept
3.處理效果佳,污泥的體積減量達到60%-90%
Good performance, an approximate volume reduction of between 60%-90%.
4.現場土建面積少,可移動,大大減少了運輸時間,運行成本和人工成本
Minimum construction work on site and easy to relocate, so transport time, running and labor costs are greatly reduced.
5.操作簡便且維護成本低廉
Low maintenance and minimum operation requirements
6.多年的各行業實踐經驗累計
Many years development experience
應用
立豐環保PSSD系統專門為城市和農村等傳統系統難以運行的區域而設計。
對于處理含水率較高的污泥或需要重新填充排空的化糞池等應用,立豐環保PSSD 系統比傳統系統更具有優勢。
LIFENG PSSD has been specifically designed for operating in restrictive areas, such as in urban and rural situations where traditional systems have difficulty. Dewatering with LIFENG PSSD system has its advantages over traditional systems, where sludge’s with a relatively high water content are found, where there is a need to refill the emptied tanks, e.g. septic tanks.
垃圾服務站點 Service stations 溝渠 Gully
化糞池 Septic tanks 洗車水 Carwash
污水處理廠 WWTP 含油污水 Oil separators
結構
主要部件表 Main Components Parts | |
1.MDS污泥脫水機/TRP固液分離裝置 | 1.MDS sludge dewatering machine/TRP solid liquid separator |
2.全自動泡藥裝置 | 2.Automatic Dosing Device |
3.電控柜 | 3. Control panel |
4.發電機 | 4. Electric generator |
5.污泥上料系統 | 5. Sludge pump system |
6.加藥泵 | 6. Dosing pump |
7.污泥切割機 | 7. Sludge cutting machine |
選型表
移動式污泥脫車/型號 | PSSD4-MDS312 | PSSD4-TRP1010 | PSSD5-MDS313 | PSSD5-TRP1210 | |
長*寬*高(mm) | 4200*2200*2400 | 4200*2200*2400 | 5100*2420*2400 | 5100*2420*2400 | |
重量(KG) | 3890 | 3890 | 4350 | 4350 | |
運行質量(KG) | 4780 | 5830 | 6230 | 7340 | |
功率(KW) | 11 | 10 | 13 | 11 | |
zui大處理量(m³/h) | 15 | 20 | 20 | 30 | |
進泥單元 | 接口 | DN100 | DN100 | DN100 | DN100 |
預處理單元 | 螺桿格柵機 | 螺桿格柵機 | 粉碎切割機 | 粉碎切割機 | |
抽吸形式 | 真空罐吸 | 真空罐吸 | 螺桿泵 | 螺桿泵 | |
脫水單元 | 絮凝箱容積(L) | 490 | 640 | 850 | 1000 |
固液分離機 | MDS312sp | TRP1010sp | MDS313sp | TRP1210sp | |
濾液出口 | DN100 | DN100 | DN100 | DN100 | |
藥劑制備 | PAC制備 | 可選 | 可選 | 標配 | 標配 |
PAC泵 | 可選 | 可選 | 標配 | 標配 | |
PAM制備 | 標配手動 | 標配手動 | 標配自動 | 標配自動 | |
PAM泵 | 計量泵 | 計量泵 | 計量泵 | 計量泵 | |
尾氣凈化 | 臭氧 | 可選 | 可選 | 可選 | 可選 |
活性炭過濾 | 可選 | 可選 | 可選 | 可選 | |
動力單元 | 市電380v三相 | 40A快速接頭 | 40A快速接頭 | 40A快速接頭 | 40A快速接頭 |
*發電機 | 30kw | 30kw | 30kw | 30kw | |
PTO發電機 | 可選 | 可選 | 可選 | 可選 |