產品名稱：微機控制M-200橡塑滑動摩擦磨損試驗儀
Product Name: microcomputer controlled M-200 plastic sliding friction testing machine
一、適用范圍及功能
Scope of application and function
符合標準：GB/ T 3960-1983 塑料滑動摩擦磨損試驗方法
Standard Test Method for friction and wear of GB/: T 3960-1983 plastic sliding
          GB/T 9141.8-1999 柔性石墨板材滑動摩擦系數測試方法
The test method of 9141.8-1999 flexible graphite plate sliding friction coefficient GB/T
橡塑滑動摩擦磨損試驗儀適用于塑料制品、橡膠制品、石墨板材或其他復合材料的滑動摩擦，磨損性能測試，也可對試驗中試樣的磨擦力、磨擦系數和磨損量進行測定。
The utility model is suitable for the sliding friction and wear performance test of plastic products, rubber products, graphite sheets or other composite materials, and can also be used for testing the friction force, the friction coefficient and the wear amount of the samples in the test.
融合了當前的智能電路系統進行控制，并結合老式M-200摩擦磨損試驗機的功能進行升級改造而成，本儀器具有測控精度高，操作便捷等優勢，是科研院所、質檢機構、實驗室研究*的試驗設備。
Combines the latest inligent circuit control system, combined with the old M-200 wear testing machine friction and function upgrade, the instrument has high control accuracy, convenient operation and other advantages, is the preferred test equipment research, quality inspection institutions, scientific research laboratory.
M-200型主要由試驗主機及智能控制系統兩大部分構成，通過微機控制系統進行操作試驗，在試驗過程中同時可以顯示數值、扭矩、時間曲線，并可以隨意設定試驗次數，顯示當前試驗數值，設定時間及當前試驗時間等多種功能，隨機配備彩色打印機，可以打印出帶有曲線、表格數據等標準要求的試驗報告。 
The friction and wear testing machine is mainly composed of the host and the inligent control system consists of two parts of M-200 type, operation test by microcomputer control system, in the course of the experiment, and can display the numerical torque, time curve, and can set the test number freely, display the current test data, various functions of the setting time and the test time, equipped with color printer, you can print out the test report with a curve, the form data standard.  
二、功能特點：
Two, functional characteristics:
  1、試樣尺寸： 30mm×7mm×6mm
Sample size: 1, 30mm * 7mm * 6mm
  2、轉動速度： 0-200轉/分  （可調）
2, rotation speed: 0-200 RPM (adjustable)
  3、負    荷： 196N ± 0.1%（可增至392N）
3,: negative charge 196N + (0.1% to 392N)
  4、摩擦環尺寸：￠40×10mm ，倒角0.5×45°，外圓表面與內圓同心度偏差小于0.01 
4, friction ring size: 40 * 10mm of, chamfering 0.5 * 45 degrees. The surface of the outer circle and inner circle concentricity deviation is less than 0.01
  5、摩擦環材質：45號鋼,淬火,熱處理HRC40-45,外圓表面光潔度▼8
5, friction ring material: 45 steel, quenching, heat treatment of HRC40-45, the outer circle surface finish size 8
  6、摩擦力矩： 0--4N·m 
6,: 0--4N - M friction torque
  7、砝碼重量：4KG砝碼一件，1KG砝碼4件，可實現重量疊加功能。
7, weight: 4KG weight a, 1KG weight 4, weight function can be realized.
三、精度：
Three, precision:
     1、速度精度：1%
Speed accuracy: 1%, 1
     2、負荷精度：0.5%
2 load accuracy: 0.5%
     3、摩擦力矩精度：1%
3, friction torque accuracy: 1%
     4、計數器精度：1S
4, counter accuracy: 1S
     5、傳感器測量精度：1% F
5, sensor measurement accuracy: 1% F
四、主要配置：
Four, the main configuration:
試驗主機    一臺     
Test host
高精度扭矩傳感器    一只     
A high precision torque sensor
計算機數據采集卡    一塊     
A computer data acquisition card
計算機控制系統    一套     
A set of computer control system
4KG砝碼    1件     
4KG weight 1
1KG砝碼    4件     
1KG weight 4
標準摩擦環    2件     
Standard friction ring 2
使用說明書    一份     
Use a manual
產品合格證    一份     
Product certificate
產品裝箱單    一份     
Product packing list
計算機    一臺    聯想
A computer association
彩色噴墨打印機    一臺    惠普（HP）
Color inkjet printer HP (HP)