廣州iHeir-TQ涂料防霉劑
產品介紹：
廣州iHeir-TQ涂料防霉劑是一種水溶性的防霉殺菌劑。具有低毒性，廣譜的殺菌特點，對霉菌、真菌、藻類等微生物有很強的殺滅作用。可廣泛應用于水性水溶性涂料、水稀釋性涂料、水分散性涂料（乳膠涂料）。在實際應用中，iHeir-TQ涂料防霉劑不會改變涂料的物理特性，與涂料的相容性好，可有效保證添加了iHeir-TQ涂料防霉劑的涂料在潮濕環境下不會出現因微生物繁殖引起的發黃、霉斑以及皸裂，使涂料表面鮮亮如初。
iHeir - TQ (Coating Anti-mold Agent) is a kind of water-soluble coating mildew fungicides. With the characteristics of low toxicity and broad-spectrum sterilization, iHeir - TQ has a strong exterminate action on mold, fungi, algae and other microorganisms . iHeir - TQ can be widely used in water-soluble coating, diluted water coating, and water dispersible coatings(Latex coating). In actual application, iHeir - TQ does not change the physical properties of coating. However, it has a good compatibility with the coating and the coating’s surface is bright.This is because iHeir-TQ will prevent mildew and crack caused by the microorganism, even in a wet environment.
產品特性
項目Item | 指標Target |
外觀Appearance | 低粘度透明液體 low viscosity , transparency liquid |
溶解性Solubility | 溶于水溶性涂料、乳膠漆soluble in water -soluble coating and latex paint |
有效成分 active ingredients（％）≥ | 45 |
主要成分Main components | 雜環化合物heterocyclic compounds |
PH值PH | 6.0-8.0 |
粒徑大小Particle size | <40微米micrometer |
使用范圍
1. 經常潮濕發霉的室內墻面
2. 因為保溫引起的冷凝水造成的墻面潮濕發霉
3. 經常發霉，每年發霉的涂料墻面
4. 對于要求除霉效果非常*的用戶注意漏水引起的發霉
5. 普通樓宇、辦公室、居室1-2%, 易長霉的車間、廠房使用添加1-2%
1. The indoor metope is wet or moldy
2. The wall becomes wet and moldy because of keeping warm and forming of drops
3. The wall often molds ,and even molds every year.
4. The users who focus on a very long-term anti-mold cycle but the hidden trouble is mildew caused by leaks ;
5. Ordinary building, office, bedroom , workshop (easy to mold）use add 1-2%;
使用方法
現已系廣泛應用于建筑物的內外裝潢涂料、乳膠漆、水性墨、色漿等各種領域的抗霉抗菌處理。iHeir-TQ與絕大多數的水溶性涂料具有很好的相容性。使用時，只需要在涂料中添加1%~2%（100公斤涂料加1~2公斤防霉劑）的iHeir-TQ，該涂料即擁有良好的殺菌防霉性能。并符合GB 18582-2001（室內環保裝飾裝修材料內墻涂料中有害物質*）要求，不含甲醛，也不含甲醛釋放物。
iHeir - TQ (Coating Anti-mold Agent) has been widely used in the structure of the internal and external decoration coating, latex paint, water-based ink, printing ink, and other areas of the various anti-mildew antibacterial treatment. iHeir - TQ has the very good compatibility with the vast majority of water-soluble coating . It only needs to add 1% ~ 2%of iHeir-TQ to coating (100 - kilogram coatings add 1 ~ 2 kg iHeir-TQ) . Without any DMF and formaldehyde, this coating has good anti-mold performance, and conforms with the requirements the GB 18582-18582 (The limited harmful substances in indoor environmental decoration materials and interior wall paint).
包裝儲存
iHeir-TQ采用25KG藍色四方塑料桶包裝，請將本產品放在陰涼干燥的地方，常溫下可保存三年，且兒童不宜接觸，避免接觸到口、鼻、眼睛等，如接觸到眼睛或口鼻，請立即用大量清水沖洗。
iHeir - TQ uses 25 kg square blue plastic drum for packaging. Please put the product in a cool, dry place which is under a normal temperature, and keep away from children . Avoid contact with the mouth, nose, and eyes. If it contacts with the mouth, nose, and eyes, please rinse immediay with plenty of water.
注意事項：
本產品屬于環保產品,但不排除個別人會產生過敏現象,因此建議使用橡膠手套和口罩操作,若不慎皮膚與藥劑接觸,可使用肥皂水清洗,產品若滴入眼中,應立即使用清水沖洗,若比較嚴重者,建議立即就醫。
This product belongs to the environmental product, but does not exclude individuals having allergic phenomenon, so we recommend you to use rubber gloves and masks when operating. If the skin contacts with the agent immodestly, please use soap water to clean.If the product drops into the eyes, please use water to wash immediay. If the condition is more severe , we suggest seeing a doctor immediay.
：張（： :）
廣州艾浩爾防霉抗菌科技有限公司
