氨基*叉膦酸（ATMP）
Amino Trimethylene Phosphonic Acid
別名：氨基三亞甲基膦酸、ATMPA、次氮基三亞甲基三膦酸、次氮基三亞甲基磷酸
分子式： N（CH2PO3H2）3 分子量： 299.0
Molecular formula: N（CH2PO3H2）3 Molecular weight: 299.0
CAS No.: 6419-19-8
結構式：
Structural formula:
1、性能Performance
在溫度200℃下，具有優良阻垢作用，化學性能穩定，不易水解，其性能優於無機聚磷酸鹽，濃度較高時，有良好的緩蝕效果，且本身無毒，*。
ATMP has good anti-scale effect under 200℃. It has good chemical stability and is hard to be hydrolyzed. It has a better performance than inorganic polyphosphates. At high concentration, it has good corrosion inhibition, and it is innocuous itself and has none pollution to environment.
2、用途Application
廣泛用于電力、化工、化肥行業循環水處理的緩蝕、阻垢，也可作為硬度大、礦化度高、水質條件惡劣的油管用水及油田注水的水處理藥劑。
ATMP is widely used for corrosion and scale inhibitions in circulating water treatment in fields of power plant, chemical industry and fertilizer. It can also be used as water treatment agent in water supply for oil pipes and oilfield injection water, which are featured in high hardness, high mineralization and other poor water conditions.
3、質量指標 Quality index
外觀：無色或微黃色透明液體，無沉淀。
Appearance: clear or yellowish transparent liquid, no sediment.
| 項目名稱 Item name | 指標 Index |
| 優等品 Premium | 一等品 First rate | 合格品 Qualified |
| 活性組分（以ATMP計）： ≥ Active component （as ATMP）: ≥ | 50.0 | 50.0 | 50.0 |
| 亞磷酸（以PO33-計）含量％ ≤ Phosphorous acid （as PO33-） % ≤ | 1.0 | 30. | 5.0 |
| 磷酸（以PO43-計）含量％ ≤ Phosphoric acid （PO43-） % ≤ | 0.5 | 0.8 | 1.0 |
| 氯化物（以C1-計）含量：％ ≤ Chloride （as Cl-）: % ≤ | 1.0 | 2.0 | 3.5 |
| PH值（1％水溶液） ≤ Ph value （1% water solution） ≤ | 1.5-2.5 | 1.5-2.5 | 1.5-2.5 |
| 密度：（20℃）g/cm3 ≥ Density （20℃）g/cm3 ≥ | 1.28 | 1.28 | 1.28 |
| 鈣螯合值mgCaCO3/g ≥ Ca Chelating ability mg CaCO3/g ≥ | 350 | 300 | 300 |
4、使用方法 Usage
本品可與無機磷，共聚物等復使用，其中ATMP用量約占5～15%，單獨使用時，一般投加量2～5ppm，在冷卻水中使用時，Ca硬限制在400ppm（以CaCO3計）為好。
ATMP can be applied in compound use with inorganic phosphorus and copolymers, among which the dosage of ATMP is 5~15%; when used alone, the dosage 2~5 ppm is preferred; when used in cooling water, the content of Ca （as CaCO3 ） should be preferably limited to 400ppm.
5、包裝與貯存 Packing and storage
本品采用聚乙烯塑料桶包裝，每桶凈重25kg，運輸時防止曝曬，貯存在干燥通風的庫房?jī)?nèi)，貯存期10個月。
Pack in 25kg net polyethylene （PE） plastic drum. Avoid insolation during transportation. Be stored for ten months in room ventilated and dry place.
會員1.png)
