當前位置：澳特爾森過濾設備（上海）有限公司>>刮刀式自清洗過濾器>>刮刀式自清洗過濾器

刮刀式自清洗過濾器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地

在線詢價 收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2024-05-16 11:59:20瀏覽次數：143次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  刮刀式自清洗過濾器

全部產品列表

暫無信息

澳特爾森過濾設備（上海）有限公司

經營模式：其他

商鋪產品：9條

所在地區：

詢價 給他留言

產品簡介

刮刀式自清洗過濾器Scrapertypeself-cleaningfilter【基本說明】：刮刀式自清洗過濾器是一種自動刮除顆粒雜質系統

詳細介紹

刮刀式自清洗過濾器

Scraper type self-cleaning filter

【基本說明】：

刮刀式自清洗過濾器是一種自動刮除顆粒雜質系統。不僅適用于懸浮液的雜質分離過濾，而且可用于對粘稠液體的雜質分離，其結構穩固，運行穩定可靠，可用于嚴酷的工業環境。

Basic Specification:

Scraper-type self-cleaning filter is an automatic scraping particle impurity system. It is not onlyapplied for the separation and filtration of impurities in suspensions, but also for the separationof impurities in viscous liquids. Because of its stable structure, stable and reliable operation, itcan be used in the harshest industrial environment.

【結構及工作原理】：

刮刀式自清洗過濾器主要組件有：電機、電控箱、控制管路、主管組件、濾網組件、刮刀、框架組件、傳動軸、進出口連接法蘭等。自清洗過濾器克服傳統過濾產品的納污量小、易受污物堵塞、過濾部分需拆卸清洗且無法監控過濾器狀態等眾多缺點，具有對原水進行過濾并自動對濾網進行清洗排污的功能，且清洗排污時系統不間斷供水，可以監控過濾器的工作狀態，自動化程度很高。覆蓋了由10um到3000um的各種過濾精度的需求。

刮刀式自清洗過濾器液體通過進口流入，通過濾元表面流向出口；當濾元表面雜質累積到一定程度時，濾元內外的壓力差達到設定值，配有校正器的刮刀貼近濾元表面轉動，對雜質進行刮除，雜質隨濾元表面進入收集腔；當收集腔內的雜質達到一定量時，排污閥根據設定時間自動開啟，將含有高濃度雜質的液體排出。全過程通過智能化PLC/PAC進行全自動控制。

Structure and working principle:
The main components of the scraper type self-cleaning filter are: motor, electronic cabinet, control pipeline, main pipe components, strainer components, scraper, frame component, transmission shaft, import and export connecting flange, etc. Self-cleaning filter overcomes many shortcomings of traditional filter products, such as small contamination capacity, easy to be blocked by contaminants, the filter part needs to be disassembled and cleaned, and the filter status cannot be monitored. It has the function of filtering the raw water and cleaning the strainer and discharging sewage automatically. With a high degree of automation, the system provides continuous water supply when cleaning the sewage, which can monitor the filter working status. It covers all kinds of filtering accuracy requirements from 10um to 3000um.
The liquid of scraper self-cleaning filter flows through the inlet and flows to the outlet through the surface of the filter element. When the impurities on the surface of the filter element accumulate to a certain extent and the pressure difference between the inside and outside of the filter element reaches the set value, the scraper with a corrector rotates close to the surface of the filter element to scrape the impurities, and the impurities enter the collection chamber with the surface of the filter element. When the impurities in the collection chamber reach a certain amount, the drainage valve opens automatically according to the set time, the liquid containing high concentration impurities can be discharged automatically. The whole process is fully automatic controlled by intelligent PLC/PAC.
【主要特點】：
■ 自動清洗，自動排渣，無需拋棄型耗材（如：濾袋、濾芯）。
■ 氣動或電動驅動，供客戶隨意選擇。
■ 在線過濾,在線清洗,無須關閉進口閥門。
■ 液體損失極少，可控制在1%以內。
■ 主要應用于高粘度、高腐蝕性液體，粘度達 800000cp。
Main features:
● Automatic cleaning, automatic slag discharge, without discard consumables (such as filter bags, filter cartridges).
● Pneumatic or electric drive, for customers to choose randomly.
● Fully on-line filtering, on-line cleaning, without closing the inlet valve.
● The loss of liquid is very small and can be controlled within 1%.
● It is mainly applied to high viscosity and corrosive liquids with a maximum viscosity of 800000 CP.
【產品分類】：
Product classification：

名稱 Name	型號 Model	說明 Explain
內刮刀式自清洗過濾器 Internal Scraper Self-cleaning Filter	CSI	由電機驅動刮刀片旋轉刮除濾網內表面雜質 Removal of impurities on the inner surface of filter screen by rotating blade driven by motor
外刮刀式自清洗過濾器 External Scraper Self-cleaning Filter	CSO	由電機驅動刮刀片旋轉刮除濾網外表面雜質 Rotary scraper blade driven by motor to remove impurities on the outside surface of filter screen
刮盤式自清洗過濾器 Disc Scraper Self-cleaning Filter	CSS	由氣缸驅動刮盤上下刮除濾網內表面雜質 Scraping up and down of the scraper driven by the cylinder to remove impurities on the inner surface of the filter screen

【行業應用】：
應用于水處理、石化、冶金、電力、精細化工、涂料、油墨、造紙、食品飲料、制藥、金屬加工等行業。
適用液體類型水、冷卻液、食用油、涂料、樹脂、粘合劑、油墨、顏料、聚合物、煤油、檸檬酸、發酵液、蛋白質、肥皂、、濕部助劑、橡膠、乙醇、巧克力、糖果、高溫油、果汁、柴油等。
Industry applications:
It is applied to water treatment, petrochemical, metallurgy, power, fine chemical industry, paint, ink, paper making, food and beverage, pharmaceutical, metal processing and other industries.

Applicable liquid type: water, coolant, edible oil, paint, resin, adhesives, ink, pigments, polymers, kerosene, citric acid, fermentation broth, protein, soap, sorbitol, wet end additives, rubber, ethanol, chocolate, candy, high temperature oil, fruit juice, diesel, etc.

【參數表】：

Parameter table：

CSI（內刮刀式自清洗過濾器Internal Scraper Self-cleaning Filter ）
型號 Model	理想流量 flow （m3/h）	過濾面積 Filter area （㎡）	筒體直徑 Barrel diameter （mm)	設備高度 Equipment height ≈（mm)	進出口尺寸 Import and export size	排污口尺寸 Size of sewage outlet	電機功率 Motor power （KW）
CSI11	4.2-12.6	0.11	219	1000	DN20-DN50	DN25	0.37
CSI21	6.5-22.4	0.21	273	1100	DN25-DN80	DN40	0.37
CSI43	7.4-48.5	0.43	273	1300	DN40-DN100	DN40	0.55
CSI71	12.3-84.8	0.71	426	1600	DN80-DN150	DN50	0.55
CSI100	18.5-125.3	1.00	426	1900	DN80-DN150	DN50	0.75
CSI125	23.5-158.2	1.25	530	2100	DN100-DN200	DN80	1.10
CSI150	26.6-208.6	1.50	530	2300	DN100-DN200	DN80	1.10
1、過濾精度：30μm-3000μm Filtration accuracy: 30-3000 um
2、使用溫度：200°以下（實際情況與密封材質有關） Use temperature: below 200 degrees (the actual situation is related to sealing material)
3、適用液體粘度：1-800000cp Applicable liquid viscosity: 1-800000 CP
4、濾網類型：內圓網（V型楔形網、O型沖孔網） Type of filter: inner circular mesh (V-wedge mesh, O-punch mesh)
5、標準工作壓力：0.1-1MPa Standard working pressure: 0.1-1 MPa
6、刮刀類型：PTFE條狀刮刀片/不銹鋼刷，可選用不同特性的改性四氟 Type of scraper: PTFE strip scraper blade/stainless steel brush. Modified tetrafluoride with different characteristics can be selected.
7、電動驅動：電動馬達驅動，三相，380V Electric drive: electric motor drive, three-phase, 380V
8、電動閥：氣動電動閥，氣源要求: 5 SCFM(m 3 /h); 壓力0.4MPa-0.8MPa Electric valve: pneumatic electric valve, air source requirements: 5 SCFM (m 3/h); pressure 0.4 MPa- 0.8 Mpa
9、理想流量：精度為100μm時的水流量，僅供參考，流量受到粘度、精度及潔凈度的綜合影響 Ideal Flow Rate: Flow rate at 100 micron accuracy for reference only. Flow rate is affected by viscosity, accuracy and cleanliness.

如需其它規格，可聯系我司技術人員咨詢！ If you need other specifications, you can contact our technical staff for consultation!

CSO（外刮刀式自清洗過濾器External Scraper Self-cleaning Filter）
型號 Model	理想流量 flow （m3/h）	過濾面積 Filter area （㎡）	筒體直徑 Barrel diameter （mm)	設備高度 Equipment height ≈（mm)	進出口尺寸 Import and export size	排污口尺寸 Size of sewage outlet	電機功率 Motor power （KW）
CSO11	4.2-12.6	0.11	273	1000	DN20-DN50	DN25	0.37
CSO21	6.5-22.4	0.21	325	1100	DN25-DN80	DN40	0.37
CSO43	7.4-48.5	0.43	325	1300	DN40-DN100	DN40	0.55
CSO71	12.3-84.8	0.71	480	1600	DN80-DN150	DN50	0.55
CSO100	18.5-125.3	1.00	480	1900	DN80-DN150	DN50	0.75
CSO125	23.5-158.2	1.25	630	2100	DN100-DN200	DN80	1.10
CSO150	26.6-208.6	1.50	630	2300	DN100-DN200	DN80	1.10
1、過濾精度：20μm-3000μm Filtration accuracy: 20-3000 um
2、使用溫度：200°以下（實際情況與密封材質有關） Use temperature: below 200 degrees (the actual situation is related to sealing material)
3、適用液體粘度：1-800000cp Applicable liquid viscosity: 1-800000 CP
4、濾網類型：外圓網（V型楔形網、O型沖孔網） Types of filters: cylindrical mesh (V-shaped wedge mesh, O-shaped punching mesh)
5、標準工作壓力：0.1-1MPa Standard working pressure: 0.1-1 Mpa
6、刮刀類型：彈性不銹鋼刮刀片 Scraper Type: Elastic Stainless Steel Scraper Blade
7、電動驅動：電動馬達驅動，三相，380V Electric Drive: Electric Motor Drive, Three-phase, 380V
8、電動閥：氣動電動閥，氣源要求: 5 SCFM(m 3 /h); 壓力0.4MPa-0.8MPa Electric valve: pneumatic electric valve, air source requirements: 5 SCFM (m 3/h); pressure 0.4 MPa-0.8 Mpa
9、理想流量：精度為100μm時的水流量，僅供參考，流量受到粘度、精度及潔凈度的綜合影響 Ideal Flow Rate: Flow rate at 100 micron accuracy for reference only. Flow rate is affected by viscosity, accuracy and cleanliness.

如需其它規格，可聯系我司技術人員咨詢！ If you need other specifications, you can contact our technical staff for consultation!

CSS（盤刮式自清洗過濾器Disc Scraper Self-cleaning Filter）
型號 Model	理想流量 flow （m3/h）	過濾面積 Filter area （㎡）	筒體直徑 Barrel diameter （mm)	設備高度Equipmentheight ≈（mm)	進出口尺寸 Import and export size	排污口尺寸 Size of sewage outlet	電機功率 Motor power （KW）
CSS11	4.2-12.6	0.11	219	1000	DN20-DN50	DN25	0.37
CSS21	6.5-22.4	0.21	273	1100	DN25-DN80	DN40	0.37
CSS43	7.4-48.5	0.43	325	1200	DN40-DN100	DN40	0.55
CSS71	12.3-84.8	0.71	426	1600	DN80-DN150	DN50	0.55
CSS100	18.5-125.3	1.00	480	1900	DN80-DN150	DN50	0.75
CSS125	23.5-158.2	1.25	530	2100	DN100-DN200	DN80	1.10
CSS150	26.6-208.6	1.50	630	2300	DN100-DN200	DN80	1.10
1、過濾精度：10μm-3000μm Filtration accuracy: 10-3000 um
2、使用溫度：200°以下（實際情況與密封材質有關） Use temperature: below 200 degrees (the actual situation is related to sealing material)
3、適用液體粘度：1-800000cp Applicable liquid viscosity: 1-800000 CP
4、濾網類型：內圓網（V型楔形網、O型沖孔網） Types of filters: inner circular mesh (V-shaped wedge mesh, O-shaped punching mesh)
5、標準工作壓力：0.1-1MPa Standard working pressure: 0.1-1 Mpa
6、刮刀類型：PTFE環型刮刀，可選用不同特性的改性四氟 Type of scraper: PTFE ring scraper. Modified tetrafluoro with different characteristics can be selected.
7、動力方式：氣缸驅動 Power Mode: Cylinder Drive
8、電動閥：氣動電動閥，氣源要求: 5 SCFM(m 3 /h);壓力0.4Mpa-0.8MPa Electric valve: pneumatic electric valve, air source requirements: 5 SCFM (m 3/h); pressure 0.4 Mpa-0.8 Mpa
9、理想流量：精度為100μm時的水流量，僅供參考，流量受到粘度、精度及潔凈度的綜合影響 Ideal Flow: Flow rate at 100 micron accuracy for reference only. Flow rate is affected by viscosity, accuracy and cleanliness.

如需其它規格，可聯系我司技術人員咨詢！ If you need other specifications, you can contact our technical staff for consultation!

【選型說明】：

Selection explanation

CSI11 - F50 - 304 - V - PN10 - PS
型號 Model	接口尺寸 Interface size	殼體材質 Shell material	密封材質 Sealing material	壓力等級 Pressure grade	表面處理 surface treatment
CSI11 （內刮型號） (Inner Scraper Model)	F:法蘭連接 Flange connection N:螺紋連接 Thread connection K:卡箍連接 Clamp connection	304 316L 2205 CS	V:氟橡膠 Fluorine rubber N:丁腈 Nitrile S:硅橡膠 silicon rubber E:三元乙丙 EPDM	PN6 PN10 PN16 更高壓力 Higher pressure	PS:噴砂 sandblasting PG:拋光 polishing PQ:噴漆 painting PF:防腐涂層 anti-corrosion painting

CSO11 （外刮型號） (External Scraper Model)

CSS11 （盤式型號） (Disc Scraper Model)